How to Install Windows 10 Easily (Complete Guide)

On this occasion , I would have a little talk about how do I install Windows 10 ? Final newly released Windows 10 , all have been very curious and interested to try it . So easy for you who want to try Windows only, you just download the windows 10 . I'd advise you to reinstall fresh from scratch than upgrading the installation process could be more perfect than an upgrade . Here , I would like to share how to install windows 10 from 0 through DVD or a flash media starts from the BIOS settings .

How to install windows 10?

• IMPORTANT! First of all, learn first about your windows partition system. In general, a laptop / PC has two disk partition commonly called the Drive C and Drive D. Know the difference? Drive C is usually the system partition and drive D is the drive data. However, most people have always misinterpreted the C drive and always put the data there. All you have to do first before installing windows 10 is, MAKE SURE YOU SECURE DATA. Immediately you need to backup all data from the Desktop, My Documents, etc. Move to Drive D all of them without exception. For a suggested Program Files folder does not need to backup everything, it would be better if you will install it using the master installer finishes after Windows 10 is installed.
• If everything is done, please create a bootable windows. Bootable windows means you need to make an installer into a Media. The media may be a stick or DVD. How to? First, prepare the drive. Try to use 4GB flash up and to burn a DVD (4.7GB). Don't use CD Drive !! Because its size is only 700MB. Here I will show a practice using the flash.
• Plug your flash drive into a PC / laptop and then run the software Rufus(You need to download it from internet first)
• Select your flash drive and then select the ISO file of Windows 10 as shown below.

• Select the Start button and wait for it to finish. If so, close rufus and not remove flashdisk .
• Please restart your PC and then if it is start start , press the hotkey to enter the system BIOS . The hotkey can you notice at the bottom right corner of your PC . Is it the bios ? Roughly it can be concluded that the BIOS similar initial settings before you boot the PC . By default , the hotkey to enter the BIOS is diverse ranging from the F2 , F4 , F10 , F8 , F12 and DEL depending on the brand PC respectively . Keep evenly Hurry pressed it that this process is not overlooked . If it takes late , please re- restart . For this process make sure you are in a state of flash plugged .
• Furthermore , if it is successfully entering the BIOS sure you will find a display of blue. Then , go to the Boot tab and find the boot options. Select the boot option to USb drive ( if no , just look for the brand name of flash an example : Kingston or others ) you can be able to see this at the top . Followed by the hard drive ( if it does not find that there was frills HDD or hard drive brand example : Hitachi ).
• If it had been arranged that way , do save and exit the F4 or F10 key ( depending on BIOS brand ) please read the rules of its key next to the lower right corner .

• After the save process is complete, it will return to restart your PC . However , are you going to meet after this with the Windows 10 installer logo.

• Up here , select the language you want to use. The rest leave it alone . Then click install now .

• The installation process is ongoing . This process will take up to 20-30 minutes .

• If you have, you pc will automatically restart . IMPORTANT !! While doing the restart process and has appeared brand logos  for PC/ laptop you immediately unplug flashdisk !! Or the installation process will return repeated .
• Wait until the restart process complete approximately 10 minutes , if it is then it will be automatically restart . After that , you will come back again faced with a choice of serial .
• Select only do this later then will be redirected to the settings menu . Select Use Express Settings button in order not complicated anymore hehe . Wait a minute until the process is complete the automatic settings .

• Furthermore , there is no question " Who owns this PC ? " Select of course I own it then next .

• Now , you will be asked to log in with a Microsoft account . Click on skip, if you want to log in you can  done it later after everything is completed .

• In the Create User Accounts section , fill in your name and password . If you do not want the password, simply leave it empty then next .
• Loading........... Wait a minute , and then you will be directed on your desktop .
• The below screen shoot is after you have done everything right.